How to make fertilizer out of paper
Step 1
Set up a paper reading station with the last box.shred refuse paper, store it is in the box, and carry the container out to a sheltered paper out of the weather.
Step 2
Then you have to choose a spot for building a compost pile. In which the location must be well-drained for a pile measuring about 27 cubic feet,such as a pile regularly 3 feet long,3feetwide ,3 feet high. Layout a layer of sticks and other big landscape refuse for the bottom of the pile.
Step 3
then in the third step you have to carry nitrogen-rich scrap from your kitchen out to the compost pile and add shredded paper with a garden fork every time you do so.paper is very carbon dance in comparison to the erosion content of kitchen is crab like coffee grounds, orange rinds and vegetable peels,so put into the compost pile at the at the ratio of 1 part paper per 10 kitchen scraps.
Step 4
Mix the compost with the garden fork whenever you return to add a new layer of scraps and paper, and poke holes in the side of the pile with the garden fork to improve ventilation.
Step 5
Spread a layer of shredded paper over the top of the pile after it reaches the desired size.This will control the stench of decomposing material.
Step 6
stick thermometer inside the pile once it has reached the desired size and the monitor its internal temperature at least work per day decomposition will raise the temperature to as high as 150 degrees Fahrenheit and high temperature of unwanted bacterias and parasites after a week of temperature above 131 degrees the content of the compose file will be safe to use.
Step 7
Allow the compose pile to continue to decompose after it self-pasteurizes.after 2 to 5 months, the paper should have completely dissolve into the pile.the pile will be ready for use as fertilizer after a year.
__________________________________________
in Hindi:
पहली नज़र में, पुराने समाचार पत्र, पत्रिकाएँ और प्रिंटर पेपर का उपयोग शायद उर्वरक बनाने के लिए एक पसंद सामग्री की तरह प्रतीत नहीं होता है, फिर भी इसके माध्यम से भारी संसाधित किया जाता है, कागज स्टील प्लांट फाइबर से बना है। यदि सही ढंग से संभाला गया कागज ढेर बनाने के लिए कार्बन का महत्वपूर्ण स्रोत है। सही परिस्थितियों में और जो एक नियमित देखभाल के लिए पर्याप्त है, अन्य नाइट्रोजन युक्त सामग्री के साथ संयुक्त कागज आप पोषक तत्वों से समृद्ध उर्वरक का निर्माण कर सकते हैं।
चरण 1
अंतिम बॉक्स के साथ एक पेपर रीडिंग स्टेशन स्थापित करें। बहुत सारे इंकार पेपर को स्टोर करें, इसे बॉक्स में रखें, और कंटेनर को मौसम से बाहर आश्रय वाले पेपर पर ले जाएं।
चरण 2
फिर आपको एक खाद ढेर के निर्माण के लिए एक स्थान चुनना होगा। जिसमें लगभग 27 क्यूबिक फीट मापने वाले ढेर के लिए स्थान अच्छी तरह से सूखा होना चाहिए, जैसे कि नियमित रूप से 3 फीट लंबा, 3 फीट, 3 फीट ऊंचा ढेर। ढेर की एक परत लेआउट और अन्य बड़े परिदृश्य ढेर के नीचे के लिए मना कर दिया।
चरण 3
फिर तीसरे चरण में आपको अपने रसोई घर से नाइट्रोजन युक्त स्क्रैप को कम्पोस्ट ढेर में ले जाना है और हर बार जब आप ऐसा करते हैं तो बगीचे के कांटे के साथ कटा हुआ कागज़ मिलाते हैं। किचन के कटाव की सामग्री की तुलना में बहुत कार्बन डांस होता है। जैसे कि कॉफी के मैदान, संतरे के छिलके और सब्जी के छिलके, इसलिए 1 भाग के कागज पर प्रति 10 किचन स्क्रैप के अनुपात में कम्पोस्ट ढेर में डालें।
चरण 4
जब भी आप स्क्रैप और कागज की एक नई परत जोड़ने के लिए वापस जाएँ, और बगीचे में कांटे के छेद को बगीचे के कांटे के साथ कंपोस्ट में मिलाएं, ताकि वेंटिलेशन में सुधार हो सके।
चरण 5
वांछित आकार तक पहुंचने के बाद ढेर के शीर्ष पर कटा हुआ पेपर की एक परत फैलाएं। यह डिकम्पोजिंग सामग्री की बदबू को नियंत्रित करेगा।
चरण 6
छड़ी थर्मामीटर के अंदर एक बार वांछित आकार तक पहुँच गया है और इसके आंतरिक तापमान की निगरानी कम से कम काम प्रति दिन के अपघटन से तापमान 150 डिग्री फ़ारेनहाइट तक बढ़ जाएगा और 131 से ऊपर तापमान के एक सप्ताह के बाद अवांछित बैक्टीरिया और परजीवी का उच्च तापमान होगा। कंपोज फाइल की सामग्री का उपयोग करने के लिए सुरक्षित होगा।
चरण 7
आत्म-पेस्टुराइज करने के बाद कंपोज़ पाइल को जारी रखने की अनुमति दें। 2 से 5 महीने के बाद, पेपर पूरी तरह से पाइल में भंग हो जाना चाहिए। ढेर एक साल बाद उर्वरक के रूप में उपयोग के लिए तैयार हो जाएगा।
__________________________________________
Comments